Polishing Compound
HoneyCombination polishing compounds are water-based and use degradable abrasives (except for the 1+ compound, which uses traditional mineral abrasives). They do not contain waxes, fillers, or gloss-enhancing silicones. These compounds are suitable for all new paint coatings (paints and clear coats), including Scratch Resistant, UHS, HS, MS 2K, and 1K, as well as for refreshing old coatings. They are also excellent for polishing furniture, marine, and other lacquers, as well as for polishing unpainted plastics, such as polycarbonate (headlight lenses). The HoneyCombination system is designed for use with polishing machines, but these compounds can also be used for manual polishing.
HARD CUTTING
COMPOUND 1+
A strong cutting, water-based compound with non-breaking grain. It is the ideal solution for the hardest clear coats. Due to its consistently strong cutting abrasive, it leaves a poor finish. It contains no fillers.
A polishing paste designed for all new paint coatings (paints and clear coats), including Scratch Resistant, UHS, HS, MS 2K, and 1K, as well as for refreshing old coatings.
AVAILABLE CAPACITIES: 0,2 L | 0,5 L | 1 L
Test with:
SHORT 2.0
WHITE U - SERIES
WHITE Classic OCF
CUTTING
COMPOUND 1
A modern, low-dust cutting compound, water-based, with degradable abrasives. It is the ideal solution for hard clear coats and single-layer acrylic paints. Thanks to its unique formula, it cuts even deep scratches, leaving a very decent finish. A polishing compound designed for all new paint coatings (paints and clear coats), including Scratch Resistant, UHS, HS, MS 2K, and 1K, as well as for refreshing old coatings.
AVAILABLE CAPACITIES: 0,2 L | 0,5 L | 1 L
Test with:
Ultra cut 2.0
BEAST
WHITE U - SERIES
WHITE Classic OCF
BLUE CLASSIC
POLISHING
COMPOUND 2
A modern, water-based polishing compound with degradable abrasives. It is the ideal solution for contemporary, soft clear coats. This intermediate paste has a reduced cutting strength in favor of a beautiful finish. It is perfect for ONE STEP paint correction or as a polishing step in full paint correction. A polishing compound designed for all new paint coatings (paints and clear coats), including Scratch Resistant, UHS, HS, MS 2K, and 1K, as well as for refreshing old coatings.
AVAILABLE CAPACITIES: 0,2 L | 0,5 L | 1 L
Test with:
2Face Fiber
BLUE U - SERIES
YELLOW U - SERIES
YELLOW Classic OCF
FINISHING
COMPOUND 3
A modern, water-based polishing compound with degradable abrasives. It is the ideal solution for contemporary, soft clear coats. A modern, water-based polishing compound with degradable abrasives. It is the ideal solution for contemporary, soft clear coats. A polishing compound designed for all new paint coatings (paints and clear coats), including Scratch Resistant, UHS, HS, MS 2K, and 1K, as well as for refreshing old coatings.
AVAILABLE CAPACITIES: 0,2 L | 0,5 L | 1 L
Test with:
RED R-DA
GREY U - SERIES
BLACK CLASSIC OCF
HILLS POLISHING PAD
LIGHT FINISHING
COMPOUND 3+
A modern, water-based polishing compound with degradable abrasives. It is the ideal solution for contemporary, soft clear coats. This is an Anti-Hologram paste, designed solely to leave a perfect, flawless surface. It is dedicated to delicate paints, where finish step challenges even experienced detailers. A polishing compound designed for all new paint coatings (paints and clear coats), including Scratch Resistant, UHS, HS, MS 2K, and 1K, as well as for refreshing old coatings.
AVAILABLE CAPACITIES: 0,2 L | 0,5 L | 1 L
Test with:
RED R-DA
GREY U - SERIES
BLACK CLASSIC OCF
HILLS POLISHING PAD
Test our bestsellers
TEST BOX
The perfect opportunity to get to know the HoneyCombination polishing paste system. A set of three modern polishing pastes: cutting, medium and finishing:
Cutting Compound 1:
A cutting compound with breaking abrasives. Thanks to its unique formula, it removes deep scratches, leaving a very decent finish that is easy to refine in subsequent stages. It is water-based and contains no fillers, silicones, etc.
Cutting 5/6 Gloss 3/6
Polishing Compound 2:
A polishing compound with reduced cutting power for an excellent finish. It is ideal for ONE STEP paint correction or as a polishing step in full paint correction. It is water-based and contains no fillers, silicones, etc.
Cutting 4/6 Gloss 4/6
Finishing Compound 3:
A finishing compound with breaking abrasives. It is perfect for removing dullness, holograms, and minor paint defects, leaving an ideal finish. It is water-based and contains no fillers, silicones, etc.
Cutting 2/6 Gloss 5/6
